Simulation of the Four Quadrant Drive

Before selecting the type of response, set the value of the selected parameter. When you select a parameter, the textfield shows the default value set inside the program. Change the parameter value if you want to and then you must click on the SET VALUE button for the change to take effect. You can go from one type of response to another after the present calculations are carried out. When you have selected a new type of response, you must click on Click to Start. If you click on Reset button, initializing routine is carried out and the motor speed is set to zero, and the other values are also reset. It is possible to see the effect of step changes in speed or load or unbalance in source or unbalance in firing circuit.

click here to open the applet

 
TO THE TOP