PowerCharge HV - High Voltage Battery Chargers -- Specifications

PowerCharge Series:

• XP Series

• iHF Series

• TR Series

• HV Series

Additional Info:

Brochure

Specifications

PCHV-6kW
200V

PCHV-6kW
400V

PCHV-6kW
800V

Nominal VA Ratings

200V / 40A

400V / 20A

800V / 10A

Input Specs.

Voltage

Single phase, 220VAC (190-266VAC)

Current

30A rms maximum

Power Factor

0.99

Current THD

<5%

Connection

User accessible terminal block

Output Specs.

Voltage

140V-200V

250V-400V

500V-800V

Current

40A max
(Power limited)

20A max
(Power limited)

10A max
(Power limited)

Power

6.0 kW at 220VAC (Max. of 6.2kW at 30A rms)

Pk-Pk Ripple

<1%

Connection

User accessible terminal block

Efficiency

> 92%

Control

Load Regulation

<1% of full scale

Control Mode

Voltage control with current limit

Protection

Input

Under voltage
Over Voltage

Output

Over Current
Over Voltage
Over temperature
Reverse polarity protection

Operating Conditions

Ambient Temperature

0 - 50ºC

Packaging

Air Cooled Sealed unit option available (IP65)1,3

Microprocessor Interface

Ribbon cable interface
5V, 10W power supply provided
Output referenced levels
Signal Interface: Voltage / Current commands, Voltage / Current feedbacks, Enable, Faults

Microcontroller with RS-232 interface option available2,3

Cooling

Forced air through heat sink fins

Mechanical

Size: 21.25"L x 13.61"W x 7.21"H
Wt.: ~ 50lb

Safety

DTM UL 1564

1. For sealed unit option, use part number PCHV-6kW-xxxV/SL.
2. For microcontroller option, use part number PCHV-6kW-xxxV/MIC.
3. For sealed units with microcontroller options, use part number PCHV-6kW-xxxV/SL/MIC.